叠合盆地凸起区多期复杂断裂特征及形成机制——以准噶尔盆地车排子凸起为例

以高精度三维地震资料为基础,结合构造演化恢复和区域构造背景,系统研究了准噶尔盆地车排子凸起断裂分布和形成机制。结果表明,车排子凸起发育深部和浅部2套断裂体系,深部断裂体系和浅部断裂体系分别发育3种断裂样式。车排子凸起共经历5个构造演化阶段,其中,晚二叠世挤压-逆冲控制了深部断裂体系的初始形成,晚侏罗世逆冲-走滑控制了深部断裂体系的最终定型,新近纪叠加掀斜、局部伸展控制了浅部断裂体系的形成。不同断裂体系在油气成藏过程中均起到了重要作用。其中:深部断裂体系的红车断裂是重要的油源断裂,低序级断层控制形成了石炭系火山岩优质储集体;浅部断裂体系使得油气向浅部层系运移调整,同时形成了断块圈闭、断鼻圈闭和断层-岩性圈闭等丰富的圈闭类型。     

Synthesizing a uniformly spaced array pattern using integral operator for removing progressive phase shift

In this article, an analytical technique is introduced to obtain the excitation coefficients of uniformly spaced linear antenna arrays in order to achieve a desired array factor. By integration of the prescribed array factor, the array factor dependency to the progressive phase shift is eliminated. A new system of linear equations is consequently obtained whose solution represents the excitation coefficients of the array. Some examples are presented to verify the accuracy of the introduced method. The performance of this strategy is compared with those obtained by the other well‐known techniques such as Woodward‐Lawson and Fourier transform. It is shown that the presented method estimates the desired array pattern with a very good precision.     

氢化物原子荧光光谱法测定酱油中微量铅的方法研究

建立了一种快速、高效的QuEChERS-高效液相色谱-质谱联用法（QuEChERS-HPLC-MS/MS）测定谷类杂粮制品中脱氧雪腐镰刀菌烯醇（DON）、3-乙酰脱氧雪腐镰刀菌烯醇（3-ADON）、15-乙酰脱氧雪腐镰刀菌烯醇（15-ADON）和玉米赤霉烯酮（ZON）共4种真菌毒素。样品前处理采用乙腈-水溶剂提取，经Florisil+C18+无水硫酸镁净化后检测。以0.10%甲酸-乙腈作为流动相，在质谱检测器的多反应监测模式下进行分析。结果表明，4种真菌毒素在各自的线性范围内线性关系良好，相关系数R2均大于0.999，回收率在85.1%～102.0%，相对标准偏差（RSD）为2.11%～6.22%。该方法具有前处理简单、净化效果好、灵敏度高和检测速度快的优点，适用于谷类杂粮制品中DON、3-ADON、15-ADON 和ZON的分析和定量检测。     

3D seismic and formation micro-imager (FMI) integrated study to delineate depositional pattern of Abu Madi (Upper Miocene) clastic reservoir rocks in El-Wastani gas field,onshore Nile Delta,Egypt

Ten wells (EW-4, EW-5, EW-6, EW-7, EW-8, EW-9, EW-10, EW-12, EW-13 and EW-15) were interpreted using the composite well logs, data of core analysis, gamma-ray logs, formation micro-imager logs (FMI), and 3D seismic data in SEGY format to understand the stratigraphy of the onshore, Nile Delta, Egypt.The amplitude analysis of 3-D seismic horizon slice of Lower Abu Madi rock unit together with the lithostratigraphic correlation through the study area depending on the gamma-ray log “HSGR” (left to right increasing), and the identification of type of bed geometry, nature of bed contacts, type of the sedimentary structures and the dominant formative paleocurrents by using some available borehole micro-resistivity images (FMI) and core photos. All of these techniques are used together to define the different depositional facies and depositional environment of the Messinian clastics (Lower Abu Madi rock unit), which is considered to be the main reservoir in the El-Wastani gas field, onshore Nile Delta, Egypt.The present study of depositional pattern of the Upper Miocene clastics reservoir (Lower Abu Madi rock unit) revealed that it is represented by high sinuous meandering channels or paleo-valley and three types of fluvial facies were defined; channel fill, channel margin, and floodplain basin.     

Atomic Modulation Triggering Improved Performance of MoO3 Nanobelts for Fiber‐Shaped Supercapacitors

Asymmetric supercapacitors (ASCs) are emerging as a new class of energy storage devices that could potentially meet the increasing power and energy demand for next‐generation portable and flexible electronics. Yet, the energy density of ASC is severely limited by the low capacitance of the anode side, which commonly uses the carbon‐based nanomaterials. Here, the demonstration of sulfur‐doped MoO_3?x nanobelts (denoted as S‐MoO_3?x) as the anode for high‐performance fiber‐shaped ASC are reported. The Mo sites in MoO₃ are intentionally modulated at the atomic level through sulfur doping, where sulfur could be introduced into the MoO₆ octahedron to intrinsically tune the covalency character of bonds around Mo sites and thus boost the charge storage kinetics of S‐MoO_3?x. Moreover, the oxygen defects are occurring along with sulfur‐doping in MoO₃, enabling efficient electron transport. As expected, the fiber‐shaped S‐MoO_3?x achieves outstanding capacitance with good rate capability and long cycling life. More impressively, the fiber‐shaped ASC based on S‐MoO_3?x anode delivers extremely high volumetric capacitance of 6.19 F cm^?3 at 0.5 mA cm^?1, which makes it promising as one of the most attractive candidates of anode materials for high‐performance fiber‐shaped ASCs.     

Ultrastrong Medium‐Entropy Single‐Phase Alloys Designed via Severe Lattice Distortion

Severe lattice distortion is a core effect in the design of multiprincipal element alloys with the aim to enhance yield strength, a key indicator in structural engineering. Yet, the yield strength values of medium‐ and high‐entropy alloys investigated so far do not substantially exceed those of conventional alloys owing to the insufficient utilization of lattice distortion. Here it is shown that a simple VCoNi equiatomic medium‐entropy alloy exhibits a near 1 GPa yield strength and good ductility, outperforming conventional solid‐solution alloys. It is demonstrated that a wide fluctuation of the atomic bond distances in such alloys, i.e., severe lattice distortion, improves both yield stress and its sensitivity to grain size. In addition, the dislocation‐mediated plasticity effectively enhances the strength–ductility relationship by generating nanosized dislocation substructures due to massive pinning. The results demonstrate that severe lattice distortion is a key property for identifying extra‐strong materials for structural engineering applications.     

Thin‐film nanostructure and polymer architecture in semicrystalline syndiotactic poly(p‐methylstyrene)–(cis‐1,4‐polybutadiene) multiblock copolymers

The thin‐film morphology of stereoregular syndiotactic poly(p‐methylstyrene)–(cis‐1,4‐polybutadiene) (sP(pMS–B)) multiblock copolymers has been investigated using tapping mode atomic force microscopy with variation of the polymer composition and monomer block lengths. The morphology of the thin films ranges from isolated circular domains of sP(pMS) embedded into a matrix of polybutadiene (PB) to isolated domains of PB embedded into a matrix of sP(pMS), passing through bicontinuous (jagged) lamellae when the pMS concentration is in the range 20–67 mol%. Multiple folding of the polymer segments, i.e. where reciprocal inclusions of polymer segments to each other phase are able to generate greater domain, has been postulated and validated by considerations on the polymer architecture and the thermal and crystalline behaviour. © 2019 Society of Chemical Industry     

Discovery of path-attribute dependency in manufacturing environments: A process mining approach

The more knowledge industrial practitioners detain of their production processes, the more they are capable of performing process improvements. Nonetheless, there may exist process characteristics and dependencies that are not easily extractable from business models, such as routing dependent attributes. This paper introduces an algorithm-driven framework to establish whether process path decisions influence the attributes in non-direct sequences, e.g., deploying machine A instead of machine B affects the % of rejected parts on the process, 4 stages down the line. This problem is shown to bears similarities with sequential pattern mining problems. The basis of the solution framework relies on process mining and data mining techniques. The approach proposed is applied on a real industrial log, unveiling deficiencies in the system and providing further improvement recommendations.     

具有光照鲁棒的图像匹配方法

针对现有的基于局部特征的图像匹配算法对光照变化敏感、匹配正确率低等问题，提出一种具有光照鲁棒性的图像匹配算法。首先使用实时对比保留去色（RTCP）算法灰度化图像，然后利用对比拉伸函数模拟不同光照变换对图像的影响从而提取抗光照变换特征点，最后采用局部强度顺序模式建立特征点描述符，根据待匹配图像局部特征点描述符的欧氏距离判断是否为成对匹配点。在公开数据集上，所提算法与尺度不变特征变换（SIFT）算法、加速鲁棒特征（SURF）算法、"风"（KAZE）算法和ORB算法在匹配速度和匹配正确率上进行了对比实验。实验结果表明：随着图像亮度差异的增加，SIFT算法、SURF算法、"风"（KAZE）算法和ORB算法匹配正确率下降迅速，所提算法下降缓慢并且正确率均高于80%；所提算法特征点检测较慢和描述符维数较高，平均耗时为23.47 s，匹配速度不及另外四种算法，但匹配质量却远超过它们。对实时性要求不高的系统中，所提算法可以克服光照变化对图像匹配造成的影响。     

Expression of Main Toll-Like Receptors in Patients with Different Types of Colorectal Polyps and Their Relationship with Gut Microbiota

Abnormal activation of Toll-like receptor (TLRs) signaling can result in colon cancer development. The aim of this study was to investigate the expression of important TLRs in different histological types of colorectal polyps and evaluate their relationship with intestinal microbiota. The expression levels of TLR2, 3, 4, and 5 were analyzed in intestinal biopsy specimens of 21 hyperplastic polyp (HP), 16 sessile serrated adenoma (SSA), 29 tubular adenoma (TA), 21 villous/tubulovillous (VP/TVP) cases, and 31 normal controls. In addition, selected gut bacteria including Streptococcus bovis, Enterococcus faecalis, Enterotoxigenic Bacteroides fragilis (ETBF), Fusobacterium nucleatum, Porphyromonas spp., Lactobacillus spp., Roseburia spp., and Bifidobacterium spp. were quantified in fecal samples using absolute qRT PCR, and, finally, the association between TLRs and these gut microbiota- was evaluated by Spearman’s correlation coefficient. Higher expression of TLR2 and TLR4 in VP/TVP and TA, and lower expression levels of TLR3 and TLR5 in all type of polyps were observed. The differences in TLR expression patterns was not only dependent on the histology, location, size, and dysplasia grade of polyps but also related to the intestinal microbiota patterns. TLR2 and TLR4 expression was directly associated with the F. nucleatum, E. faecalis, S. bovis, Porphyromonas, and inversely to Bifidobacterium, Lactobacillus, and Roseburia quantity. Furthermore, TLR3 and TLR5 expression was directly associated with Bifidobacterium, Roseburia, and Lactobacillus quantity. Our results suggest a possible critical role of TLRs during colorectal polyp progression. An abnormal regulation of TLRs in relation to gut microbial quantity may contribute to carcinogenesis.